Intel “Raptor Lake” Core i9-13900 De-lidded, Reveals a 23% Larger Die than Alder Lake

See the full post here ➡️ https://www.techpowerup.com/297506/intel-raptor-lake-core-i9-13900-de-lidded-reveals-a-23-larger-die-than-alder-lake

Rate this post

An Intel Core "Raptor Lake" engineering sample was de-lidded by Expreview giving us a first look at what will be Intel’s last monolithic silicon client processor before the company switches over to chiplets, with its next-generation "Meteor Lake." The chip de-lidded here is the i9-13900, which maxes out the "Raptor Lake-S" die, in featuring all 8 "Raptor Cove" P-cores and 16 "Gracemont" E-cores physically present on the die, along with 36 MB of shared L3 cache, and an iGPU based on the Xe-LP graphics architecture.

The "Raptor Lake-S" silicon is built on the same Intel 7 (10 nm Enhanced SuperFin) silicon fabrication node as "Alder Lake-S." The "Raptor Lake-S" (8P+16E) die measures 23.8 mm x 10.8 mm, or 257 mm² in area, which is 49 mm² more than that of the "Alder Lake-S" (8P+8E) die (around 209 mm²). The larger die area comes from not just the two additional E-core clusters, but also larger L2 caches for the E-core clusters (4 MB vs. 2 MB), and larger L2 caches for the P-cores (2 MB vs. 1.25 MB); besides the larger shared L3 cache (36 MB vs. 30 MB). The "Raptor Cove" P-core itself could be slightly larger than its "Golden Cove" predecessor.


Why should you share your news?

Contributing is one of the best ways to promote a website. This technique has been used for decades now and is still very effective. But, this strategy can make or break your rankings depending on its application.

A news website is one of the best places to publish your blog. This is because such sites always have massive amounts of targeted traffic. If you write quality content, your post will get many hits, and many people will follow your blog.

Disclaimer

The content provided has been modified and is not displayed as intended by the author. Any trademarks, copyrights, and rights remain with the source. Linux Chatter sources content from RSS feeds and personal content submissions. The views and opinions expressed in these articles are those of the authors and do not necessarily reflect Linux Chatter.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.